Willkommen, Gast
Benutzername: Passwort: Angemeldet bleiben:
  • Seite:
  • 1
  • 2
  • 3

THEMA:

Motor Safety Switch - serious safety issue 13 Dez 2017 14:36 #1

  • skyfreak
  • skyfreaks Avatar Autor
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Beiträge: 2946
  • Dank erhalten: 1445
Dear Jeti Team

I am writing this post on behalf of user ' nice ' who asked for s.o. to do this, as he thinks his english might not be sufficient to explain the issue.

When using the motor-safety-switch function, to prevent the motor starting accidently, there is a vulnerability in the code.
'nice' (aka Dennis) has made two videos to show the diference between the Jeti and the Futaba way to approach this task.

VIDEO 1:
As you can clearly see, when the throttle stick is UP e.g. full throttle, activating the motor safety switch on Futaba does not start the 'engine' in this case the servo movement, until the throttle-stick is brought down to ZERO and then moved up.

VIDEO 2:
On Jeti in general the throttle cut with the safety-switch option works, but when the throttle stick is in any other postion than ZERO, activating the motor safety switch, leads to a movement of the motor, again in this case substituted by a servo.

In these days of electric driven engines, that would mean, that the prop would start right away, worest case with full power and cause serious injuries to the pilot and/or third persons.

Peter Wessel has pointed Dennis to the option to post this issue here, and as mentioned before I am writing on their behalf.

rgds, and hopefully a FW update in near future will bring a fix for this issue.
GUIDO



Fliegergruss
GUIDO



_________________________________________________________
Too many dicks on the dance floor.
Too many dicks!​


Folgende Benutzer bedankten sich: PW, cirni, nice

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Letzte Änderung: von skyfreak.

Motor Safety Switch - serious safety issue 13 Dez 2017 16:43 #2

  • PW
  • PWs Avatar
  • Offline
  • Moderator
  • Moderator
  • Beiträge: 9328
  • Dank erhalten: 3510
Hallo,

software developer already went in contact with Guido and me ...

That´s Jeti ! Great support


Regards
PW
Rechtsbeistand u.a. bei "Modellflugproblemen"etc. : Rechtsanwälte Wessels & Partner, Tel.: 02362/27065

PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Motor Safety Switch - serious safety issue - first workaround 13 Dez 2017 16:44 #3

  • Powerpaul
  • Powerpauls Avatar
  • Offline
  • Senior Boarder
  • Senior Boarder
  • in the air today
  • Beiträge: 72
  • Dank erhalten: 2
As a first workaround I would suggest to define the start-up-position of the motor-stick (down / idle) and the safety-switch (off) to avoid this unwanted and dangerous running of the motor.

Als ersten Workaround sollte man die Schalter- und Geberstellung beim Einschalten bzw. Modellwechsel so einstellen, dass der Switch auf AUS steht und der Stick unten bzw. auf Leerlauf. Trotzdem sollte das asap gefixt werden.

P.S.: Ich mach das eh seit ich ne DC habe, weil viel sicherer ;) Mischer, Kreisel, fahrwerk usw. seit damals nie wieder aus versehen an gehabt :)
VG Paul

P.S.: Lieber schnell in der Luft als langsam am Boden

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Letzte Änderung: von Powerpaul.

Motor Safety Switch - serious safety issue 13 Dez 2017 16:51 #4

  • skyfreak
  • skyfreaks Avatar Autor
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Beiträge: 2946
  • Dank erhalten: 1445

software developer already went in contact with Guido and me ...


correct. and I already answered martin by mail.

to be honest, I am eversince doing as powerpaul mentioned.
I see the probem with that behaviour, but for me I am happy with the way it works now.
I have installed the safety-switch, the one that can only be moved when pulled and not accidently, the rest is IMHO responsiblity of a pilot.
as mentioned in the post, I was only doing Denis a favour to translate on his behalf.

rgds,
guido
Fliegergruss
GUIDO



_________________________________________________________
Too many dicks on the dance floor.
Too many dicks!​


Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Letzte Änderung: von skyfreak.

Motor Safety Switch - serious safety issue 13 Dez 2017 18:36 #5

  • oesti
  • oestis Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Beiträge: 426
  • Dank erhalten: 213
Moin Jungs,

ich habe mir, über einen logischen Schalter, eine Sprachansage eingerichtet und auf Wiederholung gesetzt, die kommt, wenn der Motor-Aus Schalter auf Aus steht und der Gasstick aus der Leerlaufposition bewegt wird. Gerade bei der DS ist es leicht möglich, dass sich, wenn z.B. ein Modell getragen wird, der Gasknüppel in Richtung Vollgas bewegt. Hier bekomme ich sofort den Hinweis, dass ich den Gasstick überprüfen muss.

Gruß Oesti
Folgende Benutzer bedankten sich: Jürgen, HFS, cirni

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Motor Safety Switch - serious safety issue 13 Dez 2017 18:50 #6

  • PW
  • PWs Avatar
  • Offline
  • Moderator
  • Moderator
  • Beiträge: 9328
  • Dank erhalten: 3510
HZi,

as we see we already have some possibilities to protect this .....

We will see if Jeti will make some modification or not.Jeti haven´t heard in more then 3-4 years about such a wish.

Jeti or other companies can not protect all "user behaviors"....

But lets see what will come or not; what we see is that within some minutes we had the contact to the Jeti software developer; that is great with Jeti.

One thing no other brand has .



Regards
PW
Rechtsbeistand u.a. bei "Modellflugproblemen"etc. : Rechtsanwälte Wessels & Partner, Tel.: 02362/27065

PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)
Folgende Benutzer bedankten sich: sunbeam, HFS, cirni, skyfreak

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Letzte Änderung: von PW.
  • Seite:
  • 1
  • 2
  • 3
Ladezeit der Seite: 0.235 Sekunden
Powered by Kunena Forum